LBSA 25.6v 104Ah 2.66kWh LiFePO4 Lithium Iron Phosphate Wall Mount Solar UPS Battery – White

The LBSA 25.6v 104Ah 2.66kWh LiFePO4 Lithium Iron Phosphate Wall Mount Solar UPS Battery is a household renewable energy storage solution developed and produced by Lithium Batteries SA. When fully installed, it is a low-voltage DC battery system with an operating voltage of 25.6V, and works with a low voltage inverter to realize the goal of energy storage for home application.

The battery pack supports parallel connection to expand capacity, which can meet various capacity requirements. It has a built-in battery management system (BMS), which can manage and monitor the pack and cell information – including voltage, current and temperature. What’s more, the BMS can balance cell charging and discharging to extend cycle life.

Features:

• 2.5KW Max Continuous Load
  Cycle life
• 10 Year or 4500 cycles (9000 Cycles on BMS display) Warranty
• Applicable for all batteries purchased after 2022/11/21

Details:

• CAN Bus Comms: Victron, Growatt, Sunsynk, DEYE
• Bulk + Absorption: 28v
• Float : 28v
• Low Voltage Cut Off: 22v
• Maximum continuous Charge/Discharge For Single Unit: 100A (Recommended 75A)
• Charge for Parallel units: (100A*”Units In parallel”) / 2
• Discharge for Parallel units: 100A * “Units in parallel

Display Definitions:

• OV – Warn: high pressure alarm
• OV – Prot: over-voltage protection
• UV – Warn: low pressure alarm
• UV – Prot: under-voltage protection
• OT-Warn：High temperature alarm
• OT-Prot：Over temperature protection
• UT – Warn: low temperature alarm
• UT – Prot: low temperature
• OC – Warn: over-current alarm
• OC – Prot: over-current protection
• CAPA – Warn: remaining capacity of the alarm
• OFF – USE: failure alarm
• SCP：Short circuit protection

Warranties:

All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.