8.2kva Vito Hybrid Inverter & 2 x 5.09kw SVolt Lithium batteries with 8 x 550w Jinko Solar panel kit

0 reviews
1
0%
2
0%
3
0%
4
0%
5
0%

The 8.2kva Vito Hybrid Inverter & 2 x 5.09kw SVolt Lithium batteries with 8 x 550w Jinko Solar panel kit is everything you need to keep the power on during loadshedding.

R62,900.00

50 in stock

50 in stock

Description

Get Everything you need to keep the power on during loadshedding with this affordable solar system package.

What this kit includes:

  • 1 x 8.2kva Vito Hybrid inverter
  • 2 x 5.09kw Svolt Lithium batteries
  • 8 x 550w Jinko Solar Panels
  • 6 x 3.2m Rails
  • 20meter x 6mm Red solar cable
  • 20meter x 6mm Black Solar cable
  • 18 x solar panel roof hooks
  • 14 x PV Mid Lock
  • 4 x PV End Lock
  • 1 x Combiner box 1in 1out
  • 1 x latch fuse holder
  • 2 x 125A fuse
  • 1 x Svolt parallel cable kit

Specifications:

8.2KVA Vito MPPT Hybrid Inverter -VITO SH8.2K48

Features:

  • Pure sine wave inverter
  • Configurable input voltage range for home appliances and personal computers via LCD setting
  • Configurable battery charging current based on applications via LCD setting.
  • Configurable AC/Solar Charger priority via LCD setting
  • Compatible to mains voltage or generator power
  • Auto restart while AC is recovering.
  • Overload/ Over temperature/ short circuit protection.
  • Smart battery charger design for optimized battery performance
  • Cold start function
  • WIFI/GPRS (Optional)
  • Can connect to lithium battery.
  • 3.2 Basic System Architecture

 

PV INPUT:

  • Max. PV Array Open Circuit Voltage 500Vdc
  • PV Array MPPT Voltage Range 90Vdc~450Vdc

RGB Light

  • Battery Mode: Red Light
  • Utility Mode: Blue Light
  • PV Mode: Purple Light

GRID/AC OUTPUT:

  • Nominal Output Voltage 220/230/240Vac
  • Feed-in Grid Voltage Range 195-253Vac
  • Feed-in Gnd Frequency Range 49-51±1Hz
  • Nominal Output Current: 15 7A
  • Power Factor Range >0.99
    Maximum Conversion Efficiency (DC/AC).97%
  • Nominal Operating Frequency 50/60Hz

WO LOAD OUTPUT POWER:

  • Full Load 8200W
  • Maximum Main Load 8200W
  • Maximum Second Load 2733W

SVOLT LiFePO4 5.09Kwh Lithium Battery 48V – 106Ah

Specifications:

  • Energy: 5.09kWh
  • Installation Type: Wall Mounted
  • Battery type-Chemistry: LiFePO4
  • Nominal Voltage: 48V
  • Nominal Capacity: 106Ah
  • Energy Density: 5090 Wh
  • Dimensions (LxWxH): 688 x 447 x 211mm
  • Weight (Approx.): 49.5Kg
  • Terminal Type: M6
  • Terminal Torque: 8.5NM
  • Case Material: SPCC
  • BMS build-in: Yes
  • Internal Resistance: <30mΩ
  • Efficiency – round trip: 99%
  • Self Discharge per Month: <3%
  • Max parallel connectors: 16Pcs
  • Cycle life (0.2C, 25°C @ 80% DOD): 6000 Cycles
  • Charge Temperature: 20°C to 65°C
  • Storage Temperature: 0°C to 50°C
  • Max Continuous Discharge Current: 100A
  • Peak Discharge Current: 150A
  • Warranty: 5 years

Jinko: 550W Solar Panel Mono Crystalline

Description

General Data

  • Model No: JKM550M-72HL4-V
  • Cell: Half Cell, Mono Crystalline
  • No. of Cells: 144(6×24)
  • Glass: Single Glass 3.2mm AR Coated Tempered
  • Junction Box: IP68
  • Connector: MC4

Electrical Parameters at STC

  • Maximum Rated Power(Pmax): 550W
  • Maximum Power Voltage(Vmp): 40.90VDC
  • Maximum Power Current(Imp): 13.45A
  • Open Circuit Voltage(Voc): 49.62VDC
  • Short Circuit Current(Isc): 14.03A
  • Module Efficiency: 21.29%

 

Operating Conditions

  • Maximum System Voltage: 1500VDC
  • Maximum Series Fuse: 25A
  • Operating Temperature: -40°C to 85°C

Safety Ratings
• IEC 61215
• IEC 61730

Solar Panel Installation Kit:

This kit includes all the components on the AC side as well as the mounting brackets & clamps in order to mount the solar panels.

Includes:

  • 6 x 3.2m Rails
  • 20meter x 6mm Red solar cable
  • 20meter x 6mm Black Solar cable
  • 18 x solar panel roof hooks
  • 14 x PV Mid Lock
  • 4 x PV End Lock
  • 1 x Combiner box 1in 1out
  • 1 x latch fuse holder
  • 2 x 125A fuse

 

NB: (Courier for panels are at your own risk, should a solar panel get damaged during shipping, Invert Solar will not be held liable for the replacement of the solar panel)

 

Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC, and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.

Reviews (0)
Leave your review
Rating
Leave your review
Rating