THE LBSA RHINO INTELLIFLEX HV-104-WFRE MODULE
Meet the LBSA High-Voltage Rack-Mount Module (7.98 kWh) – a powerful, modular LiFePO₄ energy storage unit designed for high-efficiency, scalable systems. Built for reliability and flexibility, this rack-mount module integrates into your system with click-connectors, smart cooling, and hot-swap capability. Ideal for commercial, residential, or mixed-use installations, it delivers clean, stable power while offering a 10-year, unlimited-cycle warranty.
Whether you’re expanding, upgrading, or building from scratch – this module gives you future-ready performance in a compact form.
Key Specifications
- Battery Chemistry: LiFePO₄ (Lithium Iron Phosphate)
- Nominal Energy: 7.98 kWh
- Nominal Voltage: 76.8 V
- Capacity: 104 Ah
- Configuration: 24S
- Communication: CAN Bus
- Max Continuous Charge Current: 100 A
- Max Continuous Discharge Current: 100 A
- Peak Charge/Discharge Current (60 sec): 200 A
- Charge Voltage (Bulk/Absorption): 84.3 V
- Low Voltage Cut-off: 66 V
- Operating Temperature: 0°C to 45°C
- Module Weight: Approximately 64–65 kg
- Module Dimensions: Approximately 397 × 720 × 188 mm
- Cycle Life: ≥4,800 cycles to 80% remaining capacity (at 100% DoD, 25°C)
- Warranty: 10 years (manufacturer)
Features
- Rack-mount design for commercial and residential installations.
- Click-connect power and communication connectors.
- Hot-swappable modules with automatic balancing.
- Optimized air cooling.
- Concealed cable compartment.
- IP67-rated communication and power connections.
- Expandable high-voltage system for larger energy storage requirements.
Scalability
The system supports 3 to 11 modules per rack, allowing storage capacities from approximately:
- 3 modules: 23.96 kWh
- 5 modules: 39.94 kWh
- 8 modules: 63.90 kWh
- 11 modules: 87.86 kWh
Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.
